HDRI or light looses material texture from certain angle.

[thought-priest]

Hi!
It might be a fresnel issue, and I don't know how to solve.
With HDRI, the areas before dull and desaturated. Without HDRI, its just black areas.
My gold, highly reflective material seems to look good from other angles, but in this shot, some areas look grey and dull, no color at all. It seem that the light doesn't reach at some angles? Is that fresnel issue?

[Dr. Sassi]

Hi thought-priest,

I would need a project file. Please use any HDRI from the AssetBrowser so the file can be small and Attached as c4d.

If it is larger than 1MB - please use only Google, Wetransfer, DropBox, Adobe, or Apple cloud service, not "shortened" URLs. (All for security reasons.)

Black areas are typically either reflections of "nothing" or with an HDRI around (that has no black areas), which is an "endless" reflection. This means the reflections show a reflection of themselves in another surface reflection.

But to say anything with certainty, I need to see the file.

Cheers

[thought-priest]

Thank you for quick response. Im still learning the software. SO many questions!:

[Dr. Sassi]

Hi thought -priest,

Thank you very much for the file, this was very helpful!

Here are my findings, just observations:

Remove for a test the HDRI. Then go to the RS Tag and shut off Receives Shadow. Perhaps place a little HDRI with a monochrome color R=2, G=0.5, B=1, so you can see the difference better, especially when soloing channels. Typically, a 512x256 size does this well. Float.

The HDRI has a lot of black in it, which shows in the reflections and is not well stitched. With the monochrome HDRI, you can easily compare the black areas from "infinite bounce reflections or part of the context.

The side of the object, with very few details, is relatively flat, like a typical mirror. This means that the camera's resulting (reflected) view angle of 600mm is equally small, which captures a very small part of the HDRI texture and contains very little detail. (More about this is described in the book "Light, Science and Magic", pretty much any edition, to my knowledge).

I saw that the R.H. had a high value, which normally indicates a lot of searching for the right angle. The HDRI itself has a very small resolution for this work. It could be easily 5-10 larger if you like to have readable results on the flat sides. Those mini resolutions work well for Concave surfaces, not at all for concave, while flat being in the middle, especially given the long "lens", even with the full frame as the setting.

I hope this is useful and not received as anything else.

This will be a great image, I' certain about it.

Cheers

[thought-priest]

@Dr-Sassi Thank you so much for your prompt help! I will configure to your comments. Let's see what happens!

[Dr. Sassi]

Thank you very much for the reply, thought-priest.

One more tip: explore other HDRI from the Asset Browser, and try to avoid the ".hdr" formats as those are typically inferior.
The "JHDRI_…" named ".exr" files will surely be preferred.

Besides that, you can set up Photoshop to easily test patterns, like stripes, to test resolutions, i.e., how much you need for the Object camera relation.

My best wishes for your project.

[thought-priest]

@Dr-Sassi
So, does my scale work for the scene? I thought of working in real life scale would be better. So I made the lens to be so long...
And can you please explain what is R.H?

Thank you :)))

[thought-priest]

@Dr-Sassi Oh, I have that book!

[Dr. Sassi]

Thank you very much for your reply, thought-priest.

R.H. = Rotation Heading. Sorry, I thought you adjusted it, so I assumed that is known, but yes, I should write those things more clearly. Thanks for pointing this out.

One of the book's core principles is the attempt of the photographer to visualize not only the field of view but also how that field of view continues after being redirected by a reflective surface.
Since nature has no pixel resolution, we need to understand that in detail in a 3D setup.

You might find that light on metallic surfaces has no effect, but the source has. In this way, you could just go with Emission-based materials. (Exception: Caustics might be a wanted effect or casting shadow to other objects)

Alternatively, use two or three Dome Lights and mix and direct the "light sources" in those and adjust each more to your liking, whereby I would use at least one without any HDRI as a global fill (or even test light in the beginning).
Placing these lights on a separate AOV (Arbitrary Output Variable) allows one to check each in the RS Render View separately. I think that is what you were doing already)
My typical idea of the light source (while others use it differently) is to go to block lights and use purely Intensity. When the mood/balance is in the way, I like to have selected all and work then with the so far untouched Stop slider to go up or down. This helps to get back to the initial or manage the scene more easily, like on set.

Long lenses, like 600mm, are very close to an orthogonal view (I wouldn't use mine to shoot a macro, though), which I think was the target here.
Please add this camera to your scene as an exploration. It provides the parallel impression perfectly if that is wanted.
CV_2025_drs_24_CIot_01.c4d

Scale is always OK; perhaps setting the scene scale up as well helps (Attribute Manager> Mode> Scene).

You might often find the suggestion (at least I made it quite often in the past) that the best scale indicator is when the objects are insides/around three digits before and after (e.g., 123,006), which is, since years, not longer a needed, but a good guideline nonetheless.

Enjoy exploring your scene, as pulling off the right mood and expression is, at least for me, the most fun.

Cheers

[thought-priest]

Hi Dr. Sassi,

Thank you for all your help. I did the 1st steps of replacing with b&w HDRI just to see how the surfaces react.
I also rotated camera and played with lens focal length. I also added bot if Emission weight in material just to see the problem areas.

The results as you see in screenshots. Is it normal to still see grayish color in some areas? Is it my materials? I guess I'm expecting the gold to appear "golden" everywhere. The loss of color information is what's I don't understand and not sure how to solve...

I will move on to add additional DOME lights as you mentioned.

Thank you!

[thought-priest]

[thought-priest]

[Dr. Sassi]

Hi thought-priest,

Switch the Backdrop off to see what information is behind the Gold Object. As we look at the sides of the object with a nearly tangential "view," the information is taken from the nearby background. You can't see it until you completely switch off the Backdrop.

That part of the image is around 1/20th of the viewing angle; roughly 2º is used for that part, while close to being tangential. So, the background does not have so much more. Quick guess: You do not even have 15 pixels for that side from 6K HDRI! While the image in a reflection should always be at least 1.5 times higher than the result (as the image pixel and rendered pixel rarely match (share a resulting pixel, which blurs the image), effectively, that side area has ten pixels (horizontally) in terms of average quality.

All the best

[thought-priest]

Hi!
I made the hdri image very large. so huge, it's unreasonably 1 GB!
I switched backdrop off. its properties always excluded the mesh.

I start to think that it's purely my original HDRI and its grey colors. it just washes out in some area.

Thank you for all your help.

[Dr. Sassi]

You're very welcome, thought-priest.

The "Backdrop off" idea was just for your exploration, to "see" what the rendering can "see".

Yes, those images can become large, and I have some HDRI (since I have loved to shoot my own for over two decades) that are much larger, 64K+ wide.

The small ones are more for lighting purposes only. Whereby only a very few in the Asset Browser are color precise, going by the light that would be expected, most of them are sadly color correct, easily swappable [sic], and lost, so they're used for my use).

My take on your question about washed out:
Washed out can have many reasons; often, little to no knowledge while developing those HDRIs leads to their limited usability, and I'm sorry that my input to the latest selection (in the Asset browser) was ignored. Hence the lower quality. I hope we can do better in the future.
Like a sunset is just more orange, one should expect a gray card to be gray then; things like that ruin it. In my opinion, one should always set up HDRIs. I use my Spectrum-meter (Sekonic C-800) and a light meter to shoot HDRIs. I do not trust 3rd parties, nor have I seen clear information about them. Libraries are for testing, to be frank. The worst case is Radiance (.hdr), which is a fake format 4*8bit integer, not 32bit/float/channel, and has pretty much the most questionable color management from all, meaning none in all cases I have seen.) so, if you can shoot your own.

Cheers

[Dr. Sassi]

P.S.: your output is 4800x6000 pixels, which requires a lot of resolution.

A 100% scale, but a crop with a 16,3984x8,192 image in the Dome-Light based on 8*8 large squares.

The sides are concave, which is a benefit, but look at the squares of 8*8 pixels.

I think the reflection works and shows details. Even I think that 16K is way too little for this camera setup.

I hope that clears the "dull" areas of the image. Please let me know if there is anything else; I'm happy to look into it.

Cheers

[thought-priest]

Thank you Dr!
I did the best for now about HDRI - further development of the image needed. The size definitely made a difference.
Now I have to work on crazy reflections/refractions I get, when combining two metals in one scene. Haha

[Dr. Sassi]

Hi though-priest,

Thank you for the feedback.

In the past, we mostly used a sphere and placed material on it. The idea is typically that the texture is on the outside of the sphere, correct, meaning the view on the inside needs it mirrored (U = -1). But that is here not important.

This setup here messes with scale, not with rotation. It is tailored to your project only.
CV4_2025_drs_24_REhd_01.c4d

Dark areas from the image. I had all lights shut off for this image.

Please have a look below. Use the File Merge options to get the content into your scene, or open the file, select the "sphere," and paste it into it.
The HDRI used is from the Asset Browser, so it should load. However, please explore other HDRIs.

My best wishes for your project.

[thought-priest]

Thank you! Looking at it now!

[thought-priest]

@Dr-Sassi
wow that's pretty cool! It works great, as the ring sits inside of the sphere.
I think its works even better than HDRI. And it feels that it gives more control than a Dome.
Now, I think of AOVs as compositing layers (which I will be doing alot of compositing later) . Given that the SPHERE is not a light, I can't assign it a AOV.
Is there such thing as rendering an object as an AOV?

Thank you for all your help!
I'm so new at this.